GT Concepts
2005-2008 Mustang
Trunk Light Installation Instructions
1) Fasten both lamps & inverter to roof of trunk using the supplied velcro fasteners.
Route wiring thru access holes as shown.
2) Locate trunk wiring harness in upper right side of trunk and remove from its mount.
3) Locate the black wire and the white w/ yellow stripe wire above upper end of connector.
4) Using supplied Scotchloks, connect the black light wire to the black harness wire.
Connect the red light wire to the white w/yellow stripe
harness wire.
Re-attach connector.
Trunk light automatically turns off after approximately 15 minutes.
To re-activate, momentarily close trunk or press trunk light switch
located on bottom of trunk lid.